01 von 05
Wie man eine einfache Lappen-Steppdecke herstellt
Dieses einfache Double Quil Patch Lappenmuster ist mit fünf Stoffen unterschiedlichen Kontrasts genäht. Einfache Quadrate wechseln sich mit Vier-Patch-Blöcken ab, um das Double Four Patch-Layout zu erstellen.
Sie müssen nicht über absolut perfekte Nähte nähen, wenn Sie einen Lappen Quilt machen. Nähen Sie so genau wie möglich, aber kleine Abweichungen werden nicht bemerkt.
Wenn dies Ihre erste Lappensteppdecke ist, hilft Ihnen das Erstellen einer Lappensteppung, den Montageprozess zu verstehen.
Um einen Lappen mit Dreiecken zu quilten, versuche mein Indian Hatchet Lappenmuster .
Rag Quilt Batting Entscheidungen
Flanell ist meine Lieblings-Lappenquiltwatte, weil sie weich ist und sich gut anfühlt, wenn die zerlumpten Nähte sichtbar sind. Im Gegensatz zu typischen Quiltwatches bleibt der Flanell beim Waschen intakt, so dass Sie keine Quiltstiche hinzufügen müssen, es sei denn, Sie möchten die Blöcke etwas verkleiden.
Verwenden Sie Flanell für alle drei Schichten eines Lappen Quilt für ein noch weicheres Endprodukt, aber denken Sie daran, dass zusätzliche Flanell ein bisschen zusätzliches Gewicht hinzufügt.
Fertige Lappen Quilt: ca. 38-1 / 2 "x 53-1 / 2"
Quilt-Stoffe
Große Quadrate: Blumendruck, 1-3 / 4 Yards
Vier-Patch-Blöcke: Vier verschiedene Drucke, jeweils 3/4 Yard
Flanell: 2-3 / 4 Meter
Rag Quilt Schneidekarte
Blumenquadrate
- Schneiden Sie (7) 8-1 / 2 "x 44" Streifen, dann schneiden Sie (34) 8-1 / 2 "Quadrate aus den Streifen **
Vier-Patch-Blöcke
- Aus jedem Stoff vier (4) 4-3 / 4 "x 44" Streifen schneiden, dann (36) 4-3 / 4 "Quadrate aus jedem Satz schneiden **
Flanell:
- Schneiden Sie (4) 8-1 / 2 "x 44" Streifen, dann schneiden (17) 8-1 / 2 "Quadrate **
- Schneiden Sie (8) 4-3 / 4 "x 44" Streifen, dann schneiden Sie (72) 4-3 / 4 "Quadrate **
** Zusätzliches Gewebe wird benötigt, wenn die Lauflänge nach dem Entfernen der Webkanten nicht mindestens 43 "beträgt. Siehe So berechnen Sie die Lauflänge für Quilts .
02 von 05
Machen Sie sich mit den Methoden der Rag-Quilt-Konstruktion vertraut
Rag Quilts sind einfach zu machen, sobald Sie lernen, die Nähmethode umzukehren, die wir normalerweise verwenden, um eine Steppdecke zu bilden. Alle Lappensteppdecken werden zu einzelnen Quiltsandwiches zusammengefügt und mit den Rückenseiten des Stoffes zusammengenäht , ein Schritt, der die Nahtzugaben auf der Vorderseite der Decke und nicht auf der Rückseite sichtbar macht.
Ein Gehfuß ist nicht erforderlich, um einen Lappen zu quilten, macht aber das Nähen leichter. Die in den Fuß integrierten Futterhunde helfen dabei, die obere Stofflage im Einklang mit den darunter liegenden Nähmaschinen- Transporthunden zu greifen und vorzurücken, so dass die Schichten nicht voneinander getrennt werden, wenn sie sich durch die Nähmaschine bewegen.
Nähen Sie die Teile dieser Lappenquilt zusammen mit einer 1/2 "Nahtzugabe statt der 1/4" Zoll Naht, die wir normalerweise für Quilts verwenden .
- Suchen Sie die 1/2-Zoll-Marke auf der Stichplatte Ihrer Nähmaschine. Markieren Sie sie mit einem Post-It-Hinweis oder einem Klebebandstreifen, damit Sie besser daran denken können, eine breitere Naht als gewöhnlich zu nähen.
Mache die Quiltsandwiches
- Platzieren Sie ein 8-1 / 2 "Blumenquadrat mit der rechten Seite nach unten auf Ihren Arbeitstisch. Zentrieren Sie ein Flanellquadrat der gleichen Größe oben auf dem Blütenblatt. Verteilen Sie den Flor mit einem weiteren Blumenmotiv, aber platzieren Sie dieses Quadrat richtig herum.
- Wiederholen Sie dies, um aus den 8-1 / 2 "Quadraten insgesamt 17 Quiltsandwiches zu machen.
- Verwenden Sie die gleiche Stapelmethode, um aus jedem Druck 18 Quiltsandwiches in 4-3 / 4 "Quadrate zu schneiden. Halten Sie Stapel von ähnlichen Stoffen zusammen.
Keine Sorge, wenn die Stoffe in jedem Stapel nicht perfekt aufeinander abgestimmt sind, richten Sie die Ränder so genau wie möglich aus.
Solltest du den Lappen quilten?
Es besteht keine Notwendigkeit, die Quadrate zu quilten, da der Flanell nicht auseinander fällt. Manche Leute nähen vor Beginn ein "X" oder ein anderes einfaches Muster in die Sandwiches, aber dieser Schritt ist optional.
Wenn du Quiltstiche hinzufügst , halte sie aus der 1/2-Zoll-Naht heraus, die den Umfang des Stapels umgibt.
03 von 05
Nähen Sie vier Patch Quilt Blöcke
- Stellen Sie Ihr Gerät so ein, dass die Stichlänge kürzer als normal ist. Kürzere Stiche helfen dabei, die Nähte intakt zu halten, wenn die Kanten in der Wäsche zerfransen.
- Entscheiden Sie, wie Sie die vier kleinen Quadrate in Vier-Patch-Blöcken anordnen möchten. Ordne die Teile eines Blocks neben deiner Nähmaschine an.
- Richten Sie die zwei Sandwiches in der oberen Reihe aus und legen Sie die Rückseiten des Stapels zusammen. Nähen Sie die Sandwiches entlang einer Kante mit einer 1/2 "Nahtzugabe. Wenn Ihre Stapel die gleichen Stoffe auf jeder Seite haben, ist es egal, wie sie zum Nähen positioniert sind.
- Wiederholen Sie den Vorgang, um die untere Reihe zu nähen.
- Verbinden Sie die Reihen und legen Sie die Rückseiten wieder zum Nähen zusammen. Schieben Sie Nahtzugaben in entgegengesetzte Richtungen und stoßen Sie Kreuzungen aneinander, bevor Sie Zuschnitte öffnen oder zusammendrücken, wenn Sie Blöcke angleichen. Verwenden Sie lange gerade Stifte , um Stoffe zu sichern, wenn Sie es wünschen.
Verwenden Sie den ersten Block für eine visuelle Referenz, während Sie die restlichen vier Patchblöcke zusammensetzen. Das hört sich albern an - das sind sehr einfache Quiltblöcke - aber es ist einfach, einen Patch in die falsche Position zu bringen und sich an diese "Rückwärtsnähmethode" zu gewöhnen.
- Sparen Sie Zeit, indem Sie alle obersten Stapel stapeln und dann mit den Stapeln der unteren Reihe. Denken Sie daran, eine 1/2-Zoll-Nahtzugabe zu verwenden.
- Stapeln Sie die oberen und unteren Reihenpaare neben Ihrer Nähmaschine und ordnen Sie sie so an, dass sie das richtige Blocklayout bilden.
- Ketten Sie die Reihen entlang ihrer mittleren Naht zusammen. Finger drücken die Blöcke offen.
Nimm dir eine Minute, um dir die Rückseite deiner Quiltblöcke anzusehen. Sie haben das fertige Aussehen, das wir normalerweise auf der Oberseite einer Steppdecke sehen, und machen den Steppdecken-Stepp umkehrbar.
04 von 05
Nähen Sie den Rag Quilt
Verwenden Sie Ihre Finger, um die Nahtzugaben offen oder in entgegengesetzte Richtungen zu drücken, wenn Sie die Reihen zum Nähen anpassen. Verwenden Sie gerade Stifte durch alle Ebenen , um die Kanten ausgerichtet zu halten. Entfernen Sie die Stifte beim Nähen.
Legen Sie die Rückseiten von Sandwiches zusammen, wenn Sie Komponenten zusammenbauen, und achten Sie darauf, eine 1/2-Zoll-Nahtzugabe zu verwenden.
- Sammeln Sie drei Vier-Patch-Blöcke und zwei Sandwiches aus einfachen Quadraten.
- Nähen Sie die Komponenten zusammen, beginnend und endend mit einem Vier-Patch-Block und trennen Sie die drei Vier-Patch-Blöcke mit einem Blumenquadrat. Beziehen Sie sich auf die obere Zeile in der obigen Zeichnung des Rag Quilt Layout.
- Wiederholen Sie den Vorgang, um insgesamt 4 identische Zeilen zu erstellen.
- Sammeln Sie drei florale quadratische Sandwiches und zwei Vier-Patch-Blöcke. Nähen Sie die Komponenten wie in den vorherigen Reihen zusammen, beginnen und enden Sie jede Reihe mit einem Blumenquadrat. Beziehen Sie sich auf die zweite Zeile in der Zeichnung "Rag Quilt Layout".
- Nähen Sie die Zeilen wie im Layout gezeigt zusammen, beginnend mit einer Zeile, die an ihren Enden Blöcke mit vier Patches und bei der Arbeit abwechselnde Zeilentypen enthält. Achten Sie darauf, die Rückseiten der Seiten aufeinander auszurichten und mit einer 1/2-Zoll-Nahtzugabe zu nähen.
- Nähen Sie eine Naht 1/2 "von allen vier Kanten der Decke.
05 von 05
Beende den Lumpenstepp
Es ist Zeit, in die Nahtzugaben Ihrer Decke zu schneiden, um das Ausfransen zu fördern, wenn die Decke gewaschen wird.
Verwenden Sie eine beliebige scharfe Schere, um die Clips zu machen. Gefederte Scheren, die sich nach jedem Schnitt automatisch öffnen, sorgen dafür, dass Ihre Hände nicht müde werden. Die meisten Arten haben Griffe, die deine Finger eher umwickeln als um sie herum, wodurch die Löcher verschwinden, die deine Finger nach vielen Schnitten schmerzen lassen können.
Ich benutze die oben gezeigten Heritage Snips. Sie sind aus vielen Quellen verfügbar.
Kaufen Heritage Scissors auf Amazon.com
Machen Sie Clips direkt in jede Nahtzugabe, indem Sie sie 1/4 "bis 3/8" voneinander trennen und stoppen, bevor Sie die Naht erreichen. Achten Sie darauf, nur an den Nahtkreuzungen in eine Richtung zu schneiden. Das Abschneiden in zwei Richtungen in diesen Bereichen entfernt Stoffbrocken, was zu Lücken entlang ausgefransten Kanten führt.
Machen Sie Clips in den Nähten, die den Umfang der Decke umgeben, achten Sie darauf, an jeder Ecke nur in eine Richtung zu schneiden.
Wasche die Flickenteppiche
Waschen Sie den Lappen in einem langen Waschgang. Ich benutze einen heiklen Zyklus, weil eine rauere Bewegung nicht dazu führt, dass die Klammern mehr ausbrechen. Normalerweise wäscht ich ein wenig Seife in die Wäsche, weil es den Rändern beim Ausfransen hilft. Verwenden Sie reines Wasser, wenn Sie bevorzugen.
Überprüfen Sie die Decke, bevor Sie sie in den Wäschetrockner legen. Hast du vergessen, Nähte zu schneiden? Clip sie jetzt. Trocknen Sie die Decke und schneiden Sie ggf. lose Fäden ab.
Meine Waschmaschine hat einen Flusenfilter, der die meisten Fraben fängt. Wenn dies nicht der Fall ist und Sie planen, viele Lappen-Steppdecken zu machen, denken Sie daran, dass das Spülwasser Fäden enthält, die ein septisches System beeinträchtigen könnten.
Viele der Saiten haften beim Waschen an der Decke und werden vom Flusenfilter des Trockners eingefangen.
Untersuchen Sie den Quilt auf nicht gesperrte und gebrochene Nähte
Überprüfen Sie erneut, ob die Nähte nicht geclippt sind und wie erforderlich. Drehen Sie die Decke um und prüfen Sie die Nähte von der Rückseite der Decke, um sicherzustellen, dass keine Nähte von den Clips gelöst wurden, die zu nah an den Nahtzugaben gereist sind.
Repariere gebrochene Nähte. Nähen Sie etwas vor der gebrochenen Naht und hören Sie auf, eine kurze Strecke an der beschädigten Stelle zu nähen. Nähen Sie am Anfang und am Ende der neuen Naht.
Waschen Sie die Decke so oft, wie Sie möchten, um zusätzliches Ausfransen zu fördern.
Mehr Rag Quilt Muster